Description

Hooker Blackheart Engine Mounting BracketsAdd some serious torque and power to your Jeep Wrangler YJ with a Gen III Hemi Engine Swap.These engine-mounting brackets are one part of a fully engineered swap system that provides maximum component clearances, ideal drivetrain geometry and clearance for swap headers 3.00″ high-tuck exhaust system.These engine mounts work together with the stock skid plate / transmission crossmember to mount the transmission stock NP231J transfer case. The Gen III Hemi 5.7L factory truck oil pan accessory drive system are recommended for this swap (these parts come on the donor engine when using the 2003-2008 5.7L Hemi truck engine).The 5.7L truck engine is an ideal engine choice for the Wrangler since it makes torque at a low RPM, right where it is needed for off-road use.1) Optimized for Use with 2003-2008 Dodge Ram 5.7L Hemi Truck Engine. 2) Fits Jeeps that Came from the Factory with 4 or 6-Cylinder Engines.3) Body or Suspension Lift is not Required to Install These Mounting Brackets.4) Designed Specifically for Use with Hooker Blackheart Headers, Y-pipe and Engine Swap Exhaust System for this Application.5) Additional Hooker Blackheart Parts Required for Installation:BHS514 Engine Mount Clamshell for Gen-3 Hemi (2 required)71221017HKR (red) or 71221016HKR (black) Poly Engine Mount Inserts (2 required)71223015HKR Engine Mount Bolt Kit (1 required)Bare Steel, Weld-On Design. Requires Welding Painting.Use BHS537 with 545RFE Transmission.46RE Transmission can also be used, but will require a fabricated transmission-mounting bracket to attach it to the skid plate / crossmember.