Description

Hooker Blackheart Gen III Hemi Swap Exhaust Manifolds – Low ProfileHooker Blackheart Gen III Hemi swap exhaust manifolds are one part of a fully engineered swap system that provides maximum component clearances and ideal drivetrain geometry. These manifolds are designed to fit a wide range of swap applications where clearance is limited. Fitment has been confirmed on several popular platforms, see below.These exhaust manifolds are cast from hi-silicon-moly ductile iron and feature 2.5-inch 2-bolt collectors. These manifolds provide clearance to the brake booster, steering shaft, steering box, and starter motor (both left right-side-mounted starters) and provide clearance for several automatic manual transmission options.Manifold fitment has been confirmed on the following Gen III Hemi swap vehicles when used with Holley engine swap components: Compatibility with other vehicle combinations and swap components is likely but has not been confirmed.1967-1972 A-Body manual steering only, requires power steering or shortened steering column tube and u-joint style coupler1966-1972 B-Body-Manual or Power Steering, Figure 3 in photo instruction sheet1970-1974 E-Body-Manual or Power Steering, Figure 3 in photo instruction sheet1987-1996 Dodge Dakota 2wd V6/V81997-2004 Dodge Dakota 2wd V6/V8-Upper Control arm clearance recommended, Figure 4 in photo instruction sheet1972-1993 Dodge D100/D150Requires Blackheart or White Box engine mounts, transmission crossmember, and appropriate adapter for the desired transmissionRecommended Gaskets:2003-2008 5.7L Hemi Engines Use Gaskets 7594 (or Mopar #’s 530139343AA 53013944AA)6.1L, 6.2L, 6.4L, and 2009-up 5.7L Hemi Engines (no EGR) use Gaskets – 7595 (or Mopar #’s 5038098AA 5038099AA)2009 Up 5.7L, and 2011 Up 6.4L Hemi Engines (with EGR and Heat Shield)-Mopar #’s 5045495AA 5045496AABHS582, BHS583, or BHS584 manifolds WILL fit the following engines (* see notes):5.7L 2003-2008 * 1, 25.7L 2009-2020 * 1, 3, 46.1L 2005-2010 * 1, 36.2L 2015-2020 * 1, 36.4L 2011-2020 * 1, 3, 41) Holley Engine Mounts or adapter brackets are required for correct fitment2) Square Exhaust Port-OEM Gasket P/N: 53013943AA and P/N: 53013944AA, or 75943) D-shaped exhaust port (No EGR) OEM Gasket P/N: 05038098AA and P/N: 05038099AA, or 75954) D-shaped exhaust port (with EGR and heat shield) OEM Gasket P/N: 5045495AA and PN: 5045496AA